HPA

Wolverine Airsoft M249 Wire Harness | GEN 1 Latest Edition

Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple

Completely Custom USA Machined and Designed Nozzle Same or better FPS over existing Bored out Red+ Nozzles 20% Larger Bore than current standard Red Nozzles Constructed from 6061 T6...

Amped Airsoft ASA Dual Tank Plug Adapter

This ASA (Air Source Adapter) Plug is for your Dual Tank Setups if there comes a time where you want to use one tank, where you simply thread this ASA adapter in the bottom of the UFA where a tank...

Amped Airsoft Services | Install Nozzle, Poppet, or Line

If you would like for us to install the nozzle and/or poppet into your Fusion Engine, please add this item to your cart.  If purchasing multiple nozzles and poppets you must tell us which one to...

Amped Airsoft SLP-ARX Drilled Tournament Lock Cap

Replacement cap for ARX20 SLP tanks. Predrilled so you can use a zip tie for a tournament lock.

Wolverine Airsoft FCU GEN 2 for Inferno, Reaper, Hydra, and SMP

Wolverine Airsoft 18" Wire Harness | GEN 2 Latest Edition

Wolverine Airsoft Buffer Tube Adapter | HPA Install Parts

PolarStar Fusion Engine Solenoid | PolarStar Solenoid R107

PolarStar Fusion Engine Screws V2 GEN 3 | Screw Sets

Redline Grip Connect | HPA Grip Connect

Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades

Looking for a mail in HPA Engine Custom Install service for your already owned AEG? Or how about a high performance AEG build or tune up? Have the professional tech team at Amped Airsoft complete...

Ninja 62/3000 Aluminum Air Tank | HPA Tanks

Ninja 13/3000 Aluminum Air Tank | HPA Tanks

Amped Allen Key 3/16" Hex | Firebase / SFR / LPR PSI

An L style Allen Key at 3/16. Used for adjusting the PSI on your Redline Firebase, Redline SFR, and Ninja LPR Regulators to raise or lower FPS on HPA replicas.

HPA Mag Tap Bit 1/8th Inch NPT

Amped Airsoft | 6mm Macro Line By the foot

Well the title says it all.  We will ship macro line in one continuous length that you can cut to your desired length. For example, if you add 3 of these items to your cart, you will receive one...

Amped Airsoft | 1/4" Macro Line By the foot

Well the title says it all.  We will ship macro line in one continuous length that you can cut to your desired length. For example, if you add 3 of these items to your cart, you will receive one 3...

TechT 1oz Gun Sav Lubrication | Internal Lubrication

This lubrication is great to have for your favorite HPA unit for when it needs maintenance.  As we know it's not very often that it does, but having this handy for when you do is highly recommended!...

Amped Airsoft | 1/8" to 1/8" Pipe Fitting | Stainless

Amped Airsoft | 1/8" to 1/8" Pipe Fitting | Stainless This fitting is  commonly used for attaching Universal Fill Adapters (UFAs) to regulators. It is commonly referred to as the 1m1m fitting...

Amped Airsoft | 1/4" Slip Fit Fitting 1/8 MNPT | Stainless

This fitting is a replacement fitting for your air rig if you happen to need one.  This fitting is commonly used for the macro line connections on the actual air rig. Thread: 1/8" NPT Tube Size:...

Amped Airsoft | 6mm QD Male 1/8" NPT Fitting

This fitting is a replacement fitting for your PolarStar Fusion Engine gun side quick disconnect if you happen to need one.  This fitting is commonly used for the macro line connections coming from...

Amped Airsoft SLP Airline Regulator | ARX20

  This regulator can be used as a secondary regulator for your air rig or a stand-alone regulator to make an SLP air rig setup. You will need the following to drop this regulator into your existing...

PolarStar Fusion Engine Cylinder Input Fitting 6mm

PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle

PolarStar Fusion Engine for M249 | M249 HPA Unit

PolarStar Shim Kit | Fusion Engine Installation Shim Kit

PolarStar Fusion Engine O-Ring Set | Oring Repair Kit

These are the replacement O-Rings for the Polarstar Fusion Engine. This set contains all the O-Rings that are needed to replace worn O-Rings on your Fusion Engine/PR-15.This kit contains the...

Amped Custom - Fusion Engine Poppet Shims | Pack of 4

These poppet shims are used to fine tune your stock or low flow poppet. (If you are purchasing a poppet, you can receive a shim kit at a discounted rate on the Low Flow Poppet item page)Each shim kit...

PolarStar Heavy Nozzle / Poppet Spring - FE/F2/Kythera

PolarStar Fusion Engine Red Low Flow Poppet (.0625)

PolarStar Fusion Engine Gold Low Flow Poppet (.0465)

PolarStar Wire Harness 13" for Fusion Engine, JACK, F1, F2

PolarStar Wire Harness 7.5 for JACK, F1, F2, Fusion Engine

PolarStar Fusion Engine Trigger Board for V2 Gearbox GEN3

PolarStar Bolt Catch Components for Fusion Engine

Amped Airsoft Air Rig Mini Quick Disconnect Plug Gun Side | 6mm

This is the latest connector on the market.  It is much smaller than our existing Quick Detach Couplers. If you are looking for a less bulky connector, then this is the way to go! Gun Side Tubing...

PolarStar Milsim Fitting | 90 Degree Rear Macro Fitting

Amped Line Foster Mini Quick Disconnect Plug | Fitting Only

This fitting is a replacement fitting for your air rig if you happen to need a mini quick disconnect plug.Thread: 1/8" NPT FemaleFound commonly on all of our air rigs. These are also used on our QD...

Amped Line Foster Quick Disconnect QD Regulator Adapter

This adapter is for the use with our new super flexible straight line with quick disconnects to attach to existing regulators. Connects to existing regulator that utilize 1/8" NPT female threads. ...

Foster Male 1/8" NPT Quick Disconnect Plug HPA | Mag Fitting

If you are a GBB user that has wanted to get away from using Green gas, and wanted to use something like HPA for Cold Weather performance, then this is the fitting for you.Features a threaded end for...

Amped Line | Amped HPA Line Standard Weave

The Amped Line was developed during the rise in popularity of High Pressure Air (HPA) Airsoft systems in the United States. We, as avid players, wanted a better solution to air delivery than...

Amped Airsoft SLP Regulator | Amped HPA SLP Rig

Amped Airsoft SLP Regulator | Amped HPA SLP Rig  This airsoft regulator is what we like to call our SLP (Super Low Pressure) Air Rig. This system incorporates a robust single regulator that allows...

Amped Airsoft Amped Grip Line 90 Degree AGL90

AMPED Grip Line (AGL) is a large bore line for your PolarStar Fusion Engine or Wolverine SMP that is both flexible and durable. It is enclosed in a nylon sheathing that will not affect it's...

Amped Standard Weave AGL 2.0 | Amped Grip Line 2.0

The Amped Grip Line 2.0 (AGL 2.0) is an upgraded large bore grip line that attaches to the existing 6mm macro line in the pistol grip. The AGL uses a slip fitting that allows for a quick and easy...

Ninja 7500psi Burst Disk Assembly (Black)