Skip to main content

JeffTron - Mosfet V2 to Stock - Ready to Install Drop In Kit

JeffTron

SKU: JT-MOS-W5
$44.99
Pay over time with Sezzle, PayPal or Credova
Estimate Shipping:
Adding to cart… The item has been added

JeffTron - Mosfet V2 to Stock - Ready to Install Drop In Kit

The JeffTron Mosfet V2 to Stock is a ready to install mosfet kit for V2 gearbox AEGs with the battery in the stock. The mosfet is built right on the trigger contacts and sits inside the gearbox, which saves space and replaces the original contacts. It comes with drop in wiring and a Deans T connector, so it installs without soldering.

A mosfet takes the electrical load off your trigger contacts, which helps with trigger response and contact life. It has no idle current draw and no sparking, and works with batteries up to 17 V, including LiPo 7.4 to 14.8 V. It handles springs up to M160 in the conservative rating.

Your gearbox needs a working cut off lever, selector plate, anti reversal latch, trigger and trigger block. Installation should be done by someone experienced with airsoft electronics.

Features

  • Mosfet built on the trigger contacts, installed inside the V2 gearbox
  • Drop in wiring for a battery in the stock, no soldering needed
  • Deans T connector included
  • Includes trigger switch, faston connectors, screw and manual
  • Supports batteries up to 17 V, including LiPo 7.4 to 14.8 V
  • No idle current draw and no sparking
  • AWG16 power wires and AWG22 signal wire
  • About 290 mm of wiring from the gearbox to the battery connector
  • Made for V2 gearbox AEGs

Specifications

  • Brand: JeffTron
  • Model: Mosfet V2 to Stock (JT-MOS-W5)
  • Mounting: Inside the V2 gearbox, on the trigger contacts
  • Wiring: Drop in, to the stock, approx. 290 mm gearbox to battery connector
  • Connector: Deans T connector
  • Max battery voltage: 17 V (LiPo 7.4 to 14.8 V)
  • Max spring: up to M160 (conservative rating)
  • Power wire: AWG16
  • Signal wire: AWG22
  • Requires: Functional cut off lever, selector plate, anti reversal latch, trigger and trigger block