JeffTron AR Mosfet | Micro Mosfet III Integrated into Deans Connector | Wired for Stock Battery | JT-MOS-AR
The JeffTron AR Mosfet is a ready to install mosfet kit for AR style airsoft AEGs with the battery in the stock. A JeffTron Micro Mosfet III comes already integrated into a Deans style T connector, with a full wiring harness, so most of the work is done for you. Solder the loose wires to the original trigger contacts and you’re set.
Made for V2 gearbox replicas, it handles springs up to M170 and batteries up to 17 V, including LiPo 7.4 to 14.8 V. A mosfet takes the electrical load off your trigger contacts, which helps with trigger response and contact life. It has no idle current draw and no sparking, and the conformal coating helps protect the electronics.
JeffTron lists compatibility with AR15, M4, SR25, MP5 and G3 replicas that have a V2 gearbox and a rear or stock mounted battery. Installation should be done by someone experienced with airsoft electronics.
Features
- JeffTron Micro Mosfet III integrated into a Deans style T connector
- Fully wired for V2 gearbox AEGs with the battery in the stock
- Solder the loose wires to the original trigger contacts
- Fits AR15, M4, SR25, MP5 and G3 style replicas (V2 gearbox)
- Supports springs up to M170
- Supports batteries up to 17 V, including LiPo 7.4 to 14.8 V
- Rated for 35 A burst for up to 30 seconds and 90 A single shot
- No idle current draw
- AWG16 power wires and AWG22 signal wire
- Conformal coating
- English manual included
Specifications
- Brand: JeffTron
- Model: AR Mosfet (JT-MOS-AR)
- Mosfet: Micro Mosfet III, integrated into a Deans style T connector
- Fits: V2 gearbox AR15, M4, SR25, MP5 and G3 style AEGs with the battery in the stock
- Max spring: M170
- Max battery voltage: 17 V (LiPo 7.4 to 14.8 V)
- Current: 90 A single shot, 35 A burst for up to 30 s
- Power wire: AWG16
- Signal wire: AWG22
- Active brake: No
- Requires: Functional cut off lever, selector plate, anti reversal latch, trigger and trigger block