Product Description
Real Deal Airsoft | Optimized CNC Gearset (13:1 / 18:1 / DSG)
The Real Deal Airsoft Optimized CNC Gearset is a steel gear set for AEG gearboxes, built around a redesigned tappet cam position. Real Deal says moving the cam changes the tappet timing, so the tappet plate is picked up later and the nozzle stays seated against the bucking longer. The goal is a better seal, less vibration, more consistent feeding in full auto, and steadier performance compared with older gear sets.
The sector and spur gear is CNC machined from 40Cr steel. The bevel gear is metal injection molded, with a CNC machined 40Cr steel center shaft. The gears are heat treated, with a harder treatment on the bevel center pin, and they have a low friction, wear resistant surface treatment. A chamfered tooth profile helps the gears mesh with the piston rack.
You can choose from three options: 13:1 for faster cycling, 18:1 for a standard, torque friendly ratio, or DSG for dual sector gear builds. Pick the one that matches your piston, motor, and rate of fire goals.
Real Deal recommends pairing the set with its Ultimate Performance Piston 2025 and its motors, which are matched for pinion to bevel meshing. If you use the Ultimate Tappet Plate and Delay Chip, Real Deal says you will need to modify the tappet plate so it releases while the last 3 sector teeth are still holding the piston. Reviewers describe the set as easy to shim, smooth, and quiet.
Installation means a full gearbox rebuild with shimming, so it is best for players comfortable with AEG tuning. Check your gearbox, piston, and motor setup before ordering.
Features
- Redesigned tappet cam position changes tappet timing
- Later tappet plate pickup keeps the nozzle seated longer
- CNC machined 40Cr steel sector/spur gear
- MIM bevel gear with CNC machined 40Cr steel center shaft
- Heat treated, with a harder treatment on the bevel center pin
- Low friction, wear resistant surface treatment
- Chamfered tooth profile for meshing with the piston rack
- Available in 13:1, 18:1, and DSG options
- Made by Real Deal Airsoft
Specifications
- Brand: Real Deal Airsoft
- Model: Optimized CNC Gearset
- Options: 13:1 ratio, 18:1 ratio, DSG (dual sector gear)
- Sector/spur gear: CNC machined 40Cr steel
- Bevel gear: Metal injection molded (MIM)
- Bevel center shaft: CNC machined 40Cr steel
- Treatment: Heat treated, low friction and wear resistant surface
- Tooth profile: Chamfered
- Part type: AEG gear set
More About The Real Deal Airsoft and why we carry them:
Real Deal Performance is all about providing you with the highest quality products, custom laser engraving, and even hours of AEG tech advice on their YouTube channel.
To view our full selection of The Real Deal Airsoft products click here!