Product Description
T238 | AEG Spiral Gear Set Pro Edition (13:1 / 16:1 / 18:1)
The T238 AEG Spiral Gear Set Pro Edition is a CNC machined steel gear set for AEG players who want a quieter, stronger, and more consistent gearbox. It comes in three ratios, so you can match it to your spring and your goals: 13:1 for super high speed, 16:1 for high speed, or 18:1 for high torque.
The gears are made from 40Cr steel, heat treated to 38 to 42 HRC. The bevel gear and pinion use a spiral tooth design, which T238 says adds load bearing capacity and reduces noise. The pinion is wire cut steel, and the teeth are chamfered to cut down on friction and noise.
The sector gear has a few features aimed at fast builds. A delayed tappet plate control pin helps prevent early nozzle retraction and air loss at high rates of fire, and a half height second tooth improves meshing tolerance and reduces wear.
T238 recommends a spring for each ratio. The 13:1 set is for M110 springs and under, the 16:1 for M150 and under, and the 18:1 for M180 and under. Pick the one that matches your spring, then shim the bevel gear so it meshes fully with the pinion.
It fits most standard AEG gearboxes, including M4, AK, MP5, G36, and P90 platforms. The set includes the spur gear, sector gear, bevel gear, and pinion gear. The gear puller is sold separately. A gear set means a full gearbox rebuild with shimming, so it is best for players comfortable with AEG tuning.
Features
- CNC machined 40Cr steel gear set
- Heat treated, 38 to 42 HRC
- Spiral bevel gear and pinion for load capacity and quieter running
- Wire cut steel pinion gear
- Chamfered teeth to reduce friction and noise
- Delayed tappet plate control pin to help prevent early nozzle retraction and air loss
- Half height second tooth for better meshing and less wear
- Three ratio options: 13:1, 16:1, and 18:1
- Fits most standard AEG gearboxes
- Made by T238
Specifications
- Brand: T238
- Model: AEG Spiral Gear Set Pro Edition
- Ratios: 13:1 (Super High Speed), 16:1 (High Speed), 18:1 (High Torque)
- Recommended springs: M110 and under (13:1), M150 and under (16:1), M180 and under (18:1)
- Material: 40Cr steel, heat treated
- Hardness: 38 to 42 HRC
- Manufacturing: CNC machined, with wire cut pinion gear
- Platform: Most standard AEG gearboxes (M4, AK, MP5, G36, P90, and others)
More About T238 and why Amped Airsoft Carries Them:
Founded in 2018, T238 is one of the world's leading online stores, our products are successfully equipped and serviced in many countries around the world, and has always been a creative design and manufacturing center.
To view our full selection of T238 products click here!