Product Description
Real Deal Airsoft - Brushless 37k Adjustable Motor 2.0 (Long Type / Splatter)
The Real Deal Brushless 37k Adjustable Motor 2.0 is a long type brushless AEG motor for builders who want high output, lower amp draw and a motor that runs cooler than a brushed one. Real Deal describes brushless motors as the top of the line for performance and efficiency in AEG systems, and this one is built to deliver.
It rates at 37K RPM, and you can adjust it with stepless regulation from 50% to 100%, which gives you a range of about 37k down to 18.5k RPM. That lets you tune your rate of fire for your build, from a smooth rate for a DMR to a fast one for a speed gun. It is finished in a splatter design and built with a CNC aluminum body.
The 2.0 version adds a beefier, higher voltage capacitor inside the ECU, and it has the most current ESC chip, with overheat, low voltage and locked rotor protection to help protect your motor and gearbox. A heat treated D style pinion is thread locked in place, and the 9.6mm tower sleeve with a dual bearing tower (four bearings in total) helps the motor mount neatly in your gearbox.
It works with Jefftron, Perun and Gate MOSFETs. It requires an 11.1V battery, and you should not use a 7.4V battery with it.
If you are building a high performance AEG, this motor is a strong match for a tuned piston and a good MOSFET.
Features
- Brushless AEG motor, long type shaft
- 37K RPM with stepless regulation from 50% to 100% (about 37k to 18.5k RPM)
- 2.0 version with a higher voltage capacitor in the ECU
- Current ESC chip with overheat, low voltage and locked rotor protection
- CNC aluminum body
- Heat treated D style pinion, thread locked
- 9.6mm tower sleeve with a dual bearing tower (4 bearings total)
- Compatible with Jefftron, Perun and Gate MOSFETs
- Splatter design
- Lower amp draw and longer battery life than brushed motors
Specifications
- Brand: Real Deal Airsoft
- Product: Brushless 37k Adjustable Motor 2.0
- Shaft: Long type
- Speed: 37K RPM, adjustable from 50% to 100% (about 37k to 18.5k RPM)
- Battery: 11.1V required (not for 7.4V)
- Body: CNC aluminum
- Pinion: Heat treated D style, thread locked
- Tower: 9.6mm sleeve, dual bearing (4 bearings total)
- Protection: Overheat, low voltage and locked rotor
- MOSFET compatibility: Jefftron, Perun, Gate
- Finish: Splatter
More About The Real Deal Airsoft and why we carry them:
Real Deal Performance is all about providing you with the highest quality products, custom laser engraving, and even hours of AEG tech advice on their YouTube channel.
To view our full selection of The Real Deal Airsoft products click here!