JeffTron Scylla HPA V2 Wireless Trigger Board | V2 Gearbox
The JeffTron Scylla HPA V2 is a programmable control unit for HPA systems built into a V2 gearbox. It replaces the original control unit and trigger board for PolarStar and Wolverine systems, and it supports single or dual 5 V solenoids, in both closed bolt and open bolt setups. The electronics sit on a single board inside the gearbox, with wiring routed to the stock through a JST connector. That means no separate control unit in the stock and no extra multi wire harness.
Configure everything wirelessly from the JeffTron app on iOS or Android. Set fire modes including semi, binary trigger, burst, burst and full, and full auto. Adjust trigger sensitivity, rate of fire and detailed solenoid settings, and view stats such as shot count and battery voltage. Save profiles for different play styles. The trigger uses a magnet adapter and sensors for a crisp response, and an external output lets you power accessories.
It fits V2 gearboxes built to the Tokyo Marui design, such as M4, M16, HK416, SR25, MP5 and G3 platforms. A few V2 gearboxes are not compatible, so check the compatibility list before ordering.
Features
- Replaces the original HPA control unit and trigger board
- Wireless setup through the JeffTron app on iOS and Android
- Supports single or dual 5 V solenoids, closed bolt or open bolt
- Fire modes: Safe, Semi, Binary Trigger, Burst, Burst and Full, Full
- Adjustable trigger sensitivity and rate of fire
- Detailed solenoid settings, set separately for semi and full auto
- Shot statistics and battery voltage readout
- Saved profiles for different play styles
- Drop in module with wiring to the stock and a JST connector
- External output for accessories
- Magnet trigger adapter included
Specifications
- Brand: JeffTron
- Model: Scylla HPA V2 (JT-HPA-V2)
- Gearbox: V2 gearbox, Tokyo Marui design
- HPA compatibility: PolarStar F2, F1 and JACK, Wolverine Inferno Gen 2, Redline N7 FCU Gen 2
- Solenoids: 5 V, single or dual, closed or open bolt
- Connector: JST, wiring to the stock
- Power: LiPo, 7.4 V recommended (11.1 V also listed)
- Control: Optical and magnetic sensors, app configured
- Compatible gearbox examples: M4, M16, HK416, AR15, SR25, MP5, G3, M249, ICS SSS V2
- Conditional: G&G G2 V2 and Krytac V2 (board needs a partial cut)
- Not compatible: KWA V2.5, S&T / Arcturus V2, Ares Amoeba V2, APS eSilver Edge V2, V2 gearboxes with a microswitch